Scotty Cameron Putter Guide 2026: Making Sense of the Newport, Phantom, and Studio Style Lineup

A customer walked into our shop last week holding a Scotty Cameron Newport 2 from 2017, ready to upgrade. "I want the new one," he said. We asked which new one. His face went blank. Fair reaction. Scotty Cameron currently offers more than 20 production putter models across three distinct lines — Studio Style, Phantom, and legacy Special Select — with dozens of neck, hosel, and length combinations layered on top. If you're not a Cameron obsessive, the catalog is genuinely overwhelming.

That's where this guide comes in. At Golf Club Brokers we handle, authenticate, and resell hundreds of Scotty Cameron putters every year. We see every model, every finish, every generation, and we watch which ones hold value and which ones don't. What follows is a clean, honest breakdown of the entire current lineup — blade family, mallet family, and the key legacy models you'll still find plentiful on the used market — plus the decision framework that actually matters when you're picking one.

If you've read our companion TaylorMade Spider evolution piece, you already know we think Cameron and TaylorMade are the two most important names in modern putters. This article is about making Cameron's depth work for you instead of against you.

Why Scotty Cameron's Catalog Is So Hard to Navigate

Three reasons. First, Cameron keeps multiple generations of similar-looking putters in circulation at once — a 2017 Select Newport 2, a 2020 Special Select Newport 2, a 2023 Super Select Newport 2, and a 2025 Studio Style Newport 2 all exist and all look broadly similar at a glance. Second, each model comes in multiple hosel options (plumber's neck, slant neck, Flowback, long design, Onset Center) and lengths. Third, Scotty's limited releases — Button Backs, Teryllium editions, Champions Choice, Concept putters — all build collector interest on top of the already-crowded retail catalog.

The upside: more options means more chance of finding something that fits you perfectly. The downside: you can spend hours on the Cameron website and still not know which putter belongs in your bag.

Let's cut through it.

The Two Current Families: Studio Style vs. Phantom

Forget everything else for a minute. Every current production Cameron falls into one of two camps:

• Studio Style (blades and mid-mallets). The classic Cameron look — smaller heads, lower toplines, traditional aesthetics. If you grew up picturing a Scotty as a Newport-style blade, this is what you're picturing. Launched in its current form in 2025, refreshed with new 2026 additions.
• Phantom (mallets). Modern high-MOI mallet designs built for stability and forgiveness. Head shapes 5, 7, and 9R. Redesigned for 2026 with full-face SCS inserts that bring Cameron's signature feel to the mallet category.

Both families now use the same Studio Carbon Steel insert with chain-link face milling. That's important — historically, Cameron's mallets felt harder and more clicky than his blades. That era is over. The 2026 Phantoms feel like Cameron blades do: soft, muted, precise.

Family	Best For	Typical Head Shape	Price (MSRP)
Studio Style	Traditionalists, arc putters, small-head preference	Blade / mid-mallet	$499
Studio Style OC	Arc putters wanting low-torque stability	Blade with center shaft	$549
Phantom 5 / 5 OC	Compact mallet, alignment-focused	Compact wingback mallet	$499 / $549
Phantom 7	Larger mallet, rail-like alignment	Sharp-angled wingback mallet	$499
Phantom 9R	Rounded mallet with full-length sight line	Rounded mallet	$499
Studio Style Long Design	Counterbalanced stability, longer lengths	Blade / mid-mallet, counterbalanced	$549

The Studio Style Line: Every Blade and Mid-Mallet Explained

Cameron's 2025 Studio Style launch was the most significant blade redesign in years. The big story was the new Studio Carbon Steel (SCS) face insert — a carbon steel insert milled with chain-link texture, claimed to have greater damping capacity than Teryllium, stainless steel, or aluminum. Jordan Spieth and other tour players had advocated for a return to softer carbon steel feel, and the new electroless nickel plating process solved the corrosion issues that plagued earlier carbon steel putters.

For 2026, Cameron added the Santa Fe, Fastback 2, and Fastback 2 Long Design to round out the family. Here's what each model in the current Studio Style line actually is:

The Newport Family

• Studio Style Newport. The timeless plumber's-neck blade. Rounded top line, classic Newport shape. Medium toe hang for mild-arc strokes. If you've ever seen Tiger Woods line up a putt — the shape that launched a thousand imitators.
• Studio Style Newport Plus. A slightly wider Newport with subtle additional visual mass behind the ball. More stable at address while retaining the classic profile.
• Studio Style Newport 2. Probably the single most iconic Scotty Cameron model. Square leading edge, slightly wider heel-toe profile than the Newport, plumber's neck. The shape Phil Mickelson rode to multiple majors and the default choice for tour players who want classic Cameron blade with a bit more mass. Available in left-handed.
• Studio Style Newport 2 Plus. Wider Newport 2 — more visual mass, more forgiveness. Bridges the blade-to-mid-mallet gap.
• Studio Style Newport 2.5 Plus. Further widened Newport 2 with a little more toe flow and a slightly larger overall footprint. Available in left-handed.

Shop tip: the original Newport and Newport 2 are the models customers most often trade in when they're ready to move to something slightly larger. If you're selling a Newport 2, we see strong demand — and if you're buying one used, the 2014-2020 Select and Special Select era are outstanding values.

The Fastback Family

• Studio Style Fastback. An extended heel-toe blade with a slant neck hosel. More toe hang than the Newport 2, larger footprint, modern visual cues. Popular with players who want Newport heritage but a step toward stability.
• Studio Style Fastback 1.5. The "bridge" model — between the Fastback and the Squareback. Slightly more compact than Squareback, slightly more modern than Fastback. Available in left-handed.
• Studio Style Fastback 2 (new 2026). Refined Fastback with updated shaping and improved alignment.
• Studio Style Fastback OC (new 2026). The Onset Center shaft version — center-shafted, low-torque, face-balanced. For players who want Fastback aesthetics with straight-back-straight-through stroke benefits.
• Studio Style Fastback Long Design. Counterbalanced 38-inch configuration with heavier tungsten weights and a 17-inch non-tapered grip. Built for players who prefer a longer, more stable setup.

The Squareback and Catalina

• Studio Style Squareback. The most geometric, squared-off blade in the line. Strong visual alignment cues at address.
• Studio Style Squareback 2. Refined Squareback with adjusted toe flow characteristics.
• Studio Style Squareback 2 Long Design. Counterbalanced long version.
• Studio Style Catalina. A modern take on the Laguna/Santa Fe silhouette — rounded, flowing mid-mallet shape. For players who want the mid-mallet look without going full mallet. Available in left-handed.
• Studio Style Santa Fe (new 2026). Named after the beloved legacy shape. A flowing mid-mallet with updated proportions.

The Phantom Line: Every Mallet Explained

The 2026 Phantom redesign was built around one insight: mallet golfers deserve the same feel Cameron blade golfers have always enjoyed. The challenge was physical — removing face material to accept the SCS insert weakened the mallet structure, especially on the winged Phantom 5 and 7 designs. Cameron engineered new internal reinforcement to solve the vibration problem without compromising MOI.

The result: three head shapes in nine hosel and shaft configurations.

Phantom 5 — The Compact Wingback

Cameron's longtime favorite mallet shape. A compact wingback profile with subtle rear wings that frame the ball cleanly at address. Single sightline for alignment. Used by Justin Thomas, Russell Henley, and the 2025 FedEx St. Jude champion to win on tour with prototype versions.

• Phantom 5 (plumbing neck). Standard config, mild toe hang, classic wingback mallet feel.
• Phantom 5 OC (new 2026). Onset Center configuration at $549 — first time a Phantom 5 has been offered with center shaft / low-torque setup. For face-balanced stroke players who want the compact mallet profile.

Phantom 7 — The Larger Wingback

Bigger footprint than the 5, with sharper angular lines and longer rear wings that create rail-like alignment cues. Used by recent PGA Tour winner Michael Brennan (7.2 prototype) and 2021 FedExCup champion Patrick Cantlay (also 7.2). For players who want to visually "park" the putter on the line and trust the geometry.

• Phantom 7 (double-bend shaft, new for 2026). The face-balanced base configuration. First time the standard Phantom 7 has been offered with a double-bend shaft — makes the model accessible to straight-stroke players switching from face-balanced mallets.
• Phantom 7.2 (plumbing neck). Gentle toe hang for slight-arc players who want the larger 7 head. The tour-prototype favorite.
• Phantom 7.5 (jet neck shaft). Middle ground — somewhere between toe hang and face balance. For players who fall between stroke categories.

Phantom 9R — The Rounded Mallet (New 2026)

Entirely new shape for 2026. A more rounded mallet profile (the "R" designation) with the only full-length sight line in the current Phantom lineup. A good answer for players who find the sharp-angled wingback look of the 5 and 7 too aggressive but still want a true mallet footprint.

• Phantom 9R (single-bend). Standard single-bend shaft configuration, face-balanced bias.
• Phantom 9.2R (plumber's neck). With plumber's neck hosel for mild toe hang.

Legacy Models You'll Still See on the Used Market

Cameron's back catalog runs deep, and the used market is where most value shoppers should actually focus. Here are the legacy lines you'll encounter most often at dealers like GCB, what they are, and what they're worth:

Special Select and Super Select (2020–2023)

Before the 2025 Studio Style redesign, Cameron's blade line was called Special Select (2020–2022) and then Super Select (2023). Same basic model names — Newport, Newport 2, Fastback, Squareback, Del Mar — but different face construction and finish treatments. These putters perform essentially identically to the current Studio Style line for 95 percent of players, and they sell used at substantial discounts to the latest generation.

If you want a Newport 2 or Fastback at the best value, this is the sweet spot. Expect to pay 40–60 percent of current retail for clean examples.

Select (2014–2018) — The Modern Benchmark

The 2014–2018 Select line remains one of the most beloved Cameron generations ever produced. The Select Newport 2 in particular is widely considered one of the cleanest Cameron designs of the modern era. Adjustable sole weights, 303 stainless steel construction, plenty of color and hosel variants. Even 10+ years later these putters perform at the highest level.

Studio Select (2009–2012)

One generation older than Select — Studio Select putters hold value well because of their popularity with collectors and players who simply love the shape. Some Studio Select Newport 2s now command premiums because of their role in specific tour wins.

Phantom X Line (2019–2023)

The predecessor to the current Phantom line. Models like the Phantom X 5, X 7, X 11, and X 12 were Cameron's answer to the modern mallet market. Performance is still elite — just without the new SCS insert. Used values are excellent. Tiger Woods famously played a Phantom X 5.5 during parts of his later career.

Teryllium and Button Back Limited Editions

These are special releases, not standard retail. Teryllium (Tei3) editions bring back a popular 1990s-era insert material in modern shapes. Button Back editions feature distinctive rear weight cavities that started as tour-only designs favored by players like Anthony Kim and Brooks Koepka. Both command significant premiums on the used market and tend to hold value better than standard retail Camerons.

How to Pick the Right Scotty Cameron for Your Stroke

Every Cameron is built beautifully. But the wrong Cameron for your stroke is still the wrong Cameron. Here's the decision tree we actually use at the shop.

Step 1: Identify Your Stroke Arc

• Strong arc (significant face rotation): Lean toward Studio Style Newport or Newport 2 with plumber's neck. Lots of toe hang matches your natural release.
• Slight arc (moderate face rotation): The sweet spot for most Cameron blades and the Phantom 5/7 with slant or plumber's necks.
• Straight-back-straight-through: Face-balanced options — Phantom 7 double-bend, Phantom 9R single-bend, or any OC (Onset Center) configuration.

Step 2: Pick Your Visual Preference

• Classic blade look: Studio Style Newport, Newport 2, or Fastback. Small head, disappears behind the ball.
• Mid-mallet bridge: Studio Style Catalina, Santa Fe, or Newport 2.5 Plus. More mass than a blade, less than a full mallet.
• Full mallet with wings: Phantom 5 (compact) or Phantom 7 (larger).
• Full mallet, rounded profile: Phantom 9R.

Step 3: Length and Grip

Standard Cameron lengths are 33", 34", and 35" across the lineup, with 38" available in Long Design counterbalanced variants. Stock lie angles are 70° across the board, and loft is 3° for Studio Style models and 3.5° for 2026 Phantoms. Every Cameron comes with Cameron's signature red cherry dots, Pistol or Slim grip options, and a custom headcover.

Length is the single most commonly mis-spec'd dimension we see. If your arms hang naturally when you address the ball and your eyes are over the line — standard 34" works for most golfers under 6'1". Taller, or if you stand more upright, 35" may be worth considering. Shorter or more hunched, 33".

Buying a Used Scotty Cameron: What to Inspect and What to Avoid

Here's the hard truth about used Camerons: counterfeits are rampant. Cameron putters are the most faked clubs in golf, bar none. The good news: authentic ones last essentially forever with reasonable care, so a 10-year-old Cameron from a verified dealer is a genuinely great investment.

What we check on every Cameron that comes through GCB:

• Serial number and stamping quality. Authentic Cameron stamps are crisp, consistent, and located predictably by generation. Fakes often have uneven depth, wrong font weight, or missing serial numbers entirely.
• Weight. Head weight is surprisingly distinctive — a counterfeit will frequently be a few grams off, either too heavy or too light for the specific model.
• Face milling precision. Cameron's face milling is impossibly consistent. Counterfeits usually have slightly uneven milling patterns or incorrect milling depth.
• Finish quality. Cameron finishes — whether misted stainless, black PVD, or Teryllium insert colors — are extraordinarily uniform. Fakes show patchiness, especially near the hosel and sole.
• Sole weights (if applicable). On adjustable-weight models, the weights themselves should be precisely machined, stamped with correct branding, and thread smoothly in and out of the sole.
• Headcover and shaft band match. Factory original headcovers and shaft bands are specific to model, year, and sometimes region. A mismatch isn't automatically a counterfeit, but it's a flag worth investigating.

When you buy a Scotty Cameron from Golf Club Brokers, every putter has been authenticated by our team before it lists. If we have any doubt about a putter's authenticity, it doesn't go on the shelf — full stop.

Where to Find the Best Used Cameron Values in 2026

• Select Newport 2 (2014–2018): The bestselling blade Cameron ever made, still performing at top tier. Excellent used values — expect 35–55% of what a current Studio Style Newport 2 costs.
• Special Select / Super Select (2020–2023): One generation back from current, essentially identical performance, 40–60% of retail.
• Phantom X Line (2019–2023): The predecessor to current Phantom. Tiger's Phantom X 5.5 era. Outstanding mallet values.
• Studio Select / Studio Stainless: Older generations (2005–2012) with devoted collector interest. Condition matters more here.

Key Takeaways: The Cameron Catalog Cheat Sheet

• Two current families: Studio Style (blades and mid-mallets, 12+ models) and Phantom (mallets, 3 head shapes with 9 configurations).
• Both families share the new Studio Carbon Steel insert with chain-link face milling — introduced in 2025, expanded to mallets in 2026.
• Newport 2 is the iconic blade shape — plumber's neck, square leading edge, the default tour-player Cameron choice.
• Phantom 5 is the compact wingback mallet, Phantom 7 is the larger sharp-angled wingback, and new Phantom 9R is the rounded mallet option.
• OC (Onset Center) variants are the face-balanced, low-torque center-shafted options. Available in Phantom 5 and Studio Style Fastback for 2026.
• The used market is where the real value lives. Select (2014–2018), Special/Super Select (2020–2023), and Phantom X (2019–2023) generations all offer current-gen performance at significant discounts.
• Counterfeits are rampant — buy from dealers who authenticate every putter. Camerons last forever when authentic and cared for.

Frequently Asked Questions

Ready to Buy, Sell, or Trade a Scotty Cameron?

Whether you're looking for the current 2026 Phantom 7, a classic Select Newport 2 at a serious discount, or a collector-grade limited edition, we maintain one of the country's most carefully curated used Cameron inventories. Every putter is authenticated, hand-inspected, and graded honestly. If you've got a Cameron to trade in or sell outright, we pay fair market prices based on current demand — not lowball offers designed to move you on.

Related Articles

• TaylorMade Spider Putter Evolution
• The Complete Scotty Cameron Brand Guide
• How to Care for Your Scotty Cameron Putter
• Odyssey White Hot vs Tri-Hot vs Ai-One
• Best Putters Under $200